Follow Me On...
« Progress Update | Main | Project Costs - To Be Determined »


Potential part list that i created as i’ve gone through zigbee related datasheets and digikey catalogs that i may or may not use for my board:


  • small USB connector like the one on digital cameras - Digikey Part: H295CT-ND
    also see page 44 in catalog for another connector with the mating cable,

    Walcom connector: WM5974-ND (datasheet) & the cable- WM5975-ND

  • 3.3V low drop-out regulator: LP2981AIM5-3.3, National Semiconductor
  • 1.8V low drop out regulator: LP3961ES-1.8, National Semiconductor
  • Connector to put on my board to connect with the 2420EB is SMD_HEADER_2x10 (Samtec TFM-110-02-S-D-A-K-TR) - footprint to make library later
  • Connector on the 2420EB is Samtec SMD_SOCKET_2x10 (Samtec SFM-110-02-S-D-A-K-TR)
  • Microcontroller: PIC18LF4620

References (1)

References allow you to track sources for this article, as well as articles that were written in response to this article.
  • Response
    Response: kontakt

Reader Comments

There are no comments for this journal entry. To create a new comment, use the form below.

PostPost a New Comment

Enter your information below to add a new comment.

My response is on my own website »
Author Email (optional):
Author URL (optional):
All HTML will be escaped. Hyperlinks will be created for URLs automatically.